Navigation changes to fader banks and wings in the same paging group will advance all the fader pages in the group. See Wing Paging Groups.
When fader pages are changed, motorized faders assume the last position the faders were in on that page. This includes homing submasters to their required home position if needed.
Pressing [Fader Page], or [+] on an external wing, will advance through the available pages of faders.
If pressed on a fader page with content, the pages will advance through subsequent pages with content until a blank page is reached. After that blank page, the remaining blank pages will be skipped, and the next page with content will be displayed. Pages will loop infinitely.
Example: Pages 1, 2, and 5 are populated on a 1x10 fader wing. From page 1, pages will be advanced in the order 1, 2, 3, 5, 6, back to 1, and so on.
Pressing [Shift] & [Fader Page], or [-] on an external wing, will decrement through fader pages using the same logic as above. The first blank page chronologically after a page with content will still be used in reverse order. Pages will loop infinitely.
Example: Pages 1, 5, 6, and 8 are populated on a 1x10 fader wing. From page 1 , pages will decrement in the order 1, 9, 8, 7, 6, 5, 2, back to 1, and so on.
You can access a specific fader page at any time, by holding [Fader Page] and pressing the number of the page you wish to access.
Specific pages can also be accessed by holding [Fader Page] and using the bump buttons on an external wing.
Apex fader wheels are paged independently from the faders in the slots below them. Press and hold either [Page +] or [Page -] and move the wheel you wish to page.
On Element 2 and Element Classic, you can page the faders by holding down the {Page Subs} softkey in the Live display. The bump buttons will light up in green, and the bump buttons that correspond to the currently selected pages will flash. Press the corresponding bump button to go to that page. The fader status display will change to show the fader pages. See Paging Submasters on Element 2 and Element Classic.
On Ion Classic, holding down [Fader Control] to use the bump buttons on an external wing.