Output

Note: Changes to these settings may require a restart. When required, a warning message indicating a needed restart will display.

The table displays all connected device names and their port, address, RDM, doubling, and speed information. The following settings can be edited by selecting a cell:

Address - sets the starting address for the port
RDM - enables RDM on the port
Doubled - enables dimmer doubling on the port
Speed - sets the speed for the ports. Options are: maximum, fast, medium, and slow. The speed may need to be adjusted for certain devices. The default speed is maximum.

Local DMX Outputs

DMX Outputs

Enables or disables DMX output from the local DMX ports. Enabled by default.

Default Output Protocol

Enables or disables DMX as a default output protocol. Enabled by default.

Output In Client Mode

When enabled, all client consoles will calculate and output DMX levels through their local DMX ports, including DMX ports provided by Gadget / Gadget II / Programming Wing. Disabled by default.

Local Dim Dbl Offset

This offset matches the default offset in your Sensor dimmer rack processor when configuring dimmer doubling. The default offset is 20000.