0-10V Controller - Gen 2

Echo 0-10V Dimming Controllers are available in single- or dual-zone 120/277V configurations and provide on/off functionality and 0-10V dimming for direct control of compatible LED drivers and fluorescent dimming ballasts up to 20 amps. The EchoAccess Mobile App provides configuration of the 0-10V Controller circuits and preset fade times for all 16 built-in presets.

ClosedConfiguring the Circuits and Preset Fade Times

Use the keypad to set the default preset fade timing and circuit values for each programmed preset.

  • Timing - use the keypad to set the preset fade timing used for all configured circuits in this preset
  • Circuit # Value - use the keypad to set the intensity level for each individual circuit in this preset
ClosedConfiguring Demand Response

Swipe to the left or right to access the Demand Response page and enable or disable demand response for each circuit. Enter a Value between 0 and 99 to set the highest output level when Demand Response is Enabled.

Configuration Sharing

Five buttons are available at the bottom of the configuration screen.