EchoDIN CE

Product Features

• Up to 12 power modules supported per system controller
• Power modules can be daisy chained up to 20 metres
• Dimmer: 2x600W; 230V input
  • Phase-adaptive dimmer auto-switches between forward- or reverse-phase mode based on load type
  • Target loads: LED, tungsten fluorescent, ELV
  • Neutral connects to input or output
  • Senses presence of power input
  • Reports voltage, level and connected load
• Relay
  • 90-250V universal input and output
  • Neutral connects from input to output
  • Senses presence of power input
  • Manual override
• DMX-512A or stand-alone control
  • Advanced DMX control of relays
• Network card optional
  • Advanced control of relays and dimmer over streaming ACN (sACN)
• Sequencer, presets and sequences can be built for automated system power-ups and downstream lighting and audio
• Status feedback (with Ethernet interface)
  • Breaker state
  • Relay state
  • Current draw per circuit
  • Phase voltage
  • Energy usage per circuit
• Built-in control
  • 16 presets available per space with up to eight discrete spaces
  • 16-step sequence per space for power-up and power-down routines
  • Contact input for worklight or emergency lighting bypass
• Accessories
  • Ethernet interface
    • Advanced control of relays over sACN
  • RideThru
    • Short term power backup of control electronics
    • Automatically engages when power is lost
    • Recharges during normal power operation
• Mix-and-match up to two options:
  • 0-10V low-voltage dimming control
    • 24 outputs for control of LEDs or four-wire fluorescents
  • DALI dimming control
    • 24 control loops of DALI broadcast control
    • Each loop controls up to 64 ballasts
  • Contact input
    • 24 dry contact inputs