Remote I/O Modules

S P E C I F I C A T I O N S

GENERAL

• MRIO 80 -- The RIO 8/0 featur es eight configurable Tri-Mode inputs that accept almost any input from the necessary equipment: digital-active high, digital-active low, or contact closure.
• MRIO 44 -- When you need both input triggers and contr ol over other devices in the same location, choose the RIO 4/4. Featuring both relay outputs and configurable Tri-Mode inputs, the RIO 4/4 allows you to integrate with almost any third-party device.
• MRIO 08 -- When you need to issue commands to thir d-party devices, the MRIO 0/8 gets the job done with eight fully isolated relay outputs. Programmed and configured using Unison Mosaic Designer Software
• RS232/485 serial output, or up to 96 channels of DMX output

FUNCTIONAL

• Support for up to 100 of each MRIO I/O module in any Mosaic Control System
• Serial connectivity using RS232 or RS485 per module, or optional DMX output for up to 96 channels
• Remote Firmware Upload

MECHANICAL

• 4 unit wide DIN Enclosure
• Mounting complies with DIN43880 and EN60715 (35/7.5 rail)
• Rotary switch for selecting network address
• All connections use standard plugable connectors

ELECTRICAL

• 10/100Base-TX Ethernet using RJ45 connection
• PoE power input (IEEE 802.3af) (Required)
• 8-bit ADC analog inputs (MRIO80 and MRIO44)
• Isolated tri-mode digital inputs (MRIO80 and MRIO44) -- Support active high, active low, or contact closure
• Isolated relay outputs (MRIO44 and MRIO08)
  -- 1KV isolation
  -- Support up to 250mA at 48VDC
• RS232 or RS485 Serial using 3-pin Camden header
• ETL and cETL Listed, CE compliant

THERMAL

• Ambient room temperature: 0-50°C / 32-122°F.

PHYSICAL

ORDERING INFORMATION